Uncheck both of the “Advanced Options” (Ambient Light Smart Control and Flare Correct) and click “Next”.If you have been using other target settings or your print lab recommends other settings, feel free to use them. ![]() When profiling, select the “Advanced” method and use D65 for the white point target and select the bottom radio button to choose a target luminance of 120 cd/m².Click “OK” to save these settings and close the “Preferences” window. If this is the new 4K 21.5" or 5K 27" Retina iMac manufactured in Late 2015 or later, select "GB-LED (RG Phosphor)" for the Technology Type. Select “White LED” for your Technology Type if it is an Apple display manufactured after 2009. Uncheck “Achieve display luminance value using video LUTs” and uncheck “Enable ADC”.On Mac…go to “ColorMunki Display” in the menu bar and click on “Preferences”.Follow these instructions to turn these functions off: I would recommend turning off “ADC” and not using the video LUTs to adjust brightness by opening the ColorMunki Display “Preferences” window with the ColorMunki plugged in. Profile your display using this workflow: ![]() Connect the CM Display and open the ColorMunki Display software application.The onscreen color should change and will likely look bad. Click on the profile named “DisplayProfile_Linear.icc” to reset your display’s RGB channels to a linear fashion. Uncheck the "Show profiles for this display only" check box. Open “Displays” in System Preferences and select the “Color” tab.Navigate to Contents > MacOS > Profiles and then copy and paste the “XRite_LinearProfile.icc” profile to the Mac HD\Library\ColorSync\Profiles folder.Now go to the Applications folder and right-click (or control-click) on the ColorMunki Display icon and click on “Show Package Contents”.Make sure that the “Display contrast” slider is set all the way to the left at “Normal”. Go to System Preferences > Accessibility and select the “Display” option on the left.Go to the Apple icon in the menu bar > System Preferences > Accessibility.Next, please do the following in exactly this order: Go to System Preferences > Displays and uncheck “Automatically adjust brightness” if it is available.Laptops must have the power supply connected when profiling.Consider turning off all anti-virus and/or firewall software when profiling.Do not push on the device while measuring as pressure can change color on LCD screens. An instrument that is not flush on the screen’s surface will result in bad measurement data and then poor results when using the profile. PLACE THE MEASUREMENT DEVICE FLUSH ON THE SCREEN WHEN PROFILING! This will more easily be accomplished tipping the display back and carefully place the device on the screen while viewing from the side. ![]() Some laptop computers will require a powered USB hub to deliver the necessary power.
0 Comments
Leave a Reply. |